Additional functions using the PC interface
| The Gigaset QuickSync program has been installed on the computer. Free to download at www.gigaset.com/quicksync |
QuickSync functions:
Sync the handset's directory with Outlook
Upload CLIP-pictures (.bmp) from the computer to the handset
Upload pictures (.bmp) as screensavers from the computer to the handset
Upload sounds (ringtone melodies) from the computer to the handset
Update firmware
| Connect the handset directly to the PC, not via a USB hub. |
Transferring data
| Data transfer using Bluetooth: The computer has Bluetooth capability. A USB data cable is not plugged in. If a USB data cable is plugged in during an existing Bluetooth connection, the Bluetooth connection is interrupted. |
Launch the
Gigaset QuickSync program on the computer.
The message Data transfer in progress is shown on the display during data transfer between the handset and PC. During this time, it is not possible to enter any data using the keypad and incoming calls are ignored.
Carrying out a firmware update
Connect the telephone and the PC using a
USB data cable (
Connecting the USB data cable)
Launch
Gigaset QuickSync Establish connection to the handset
Start firmware update in
Gigaset QuickSync . . . Information about this can be found in the
Gigaset QuickSync help feature
The update process may take up to 10 minutes (not including download time).
The data are first downloaded from the online update server. The time required for this depends on Internet connection speed.
The display on your telephone is switched off and the Message key
and the Talk key
will flash.
Once the update is complete, your telephone will automatically restart.
Procedure in the event of an error
If the update procedure fails or the telephone no longer functions properly after the update, repeat the update procedure:
End the
Gigaset QuickSync program on the PC
Remove the USB data cable from the telephone
Remove the battery (
)
Replace the battery
Carry out the firmware update again as described above
If the update procedure fails more than once or it is no longer possible to connect to the PC, carry out the Emergency Update:
End the
Gigaset QuickSync program on the PC
Remove the USB data cable from the telephone
Remove the battery (
)
Press and hold keys
and
at the same time with the forefinger and middle finger
Replace the battery
Release keys
and
. . . the Message key
and the Talk key
will flash alternately
Carry out the firmware update as described above
| Always save pictures and sounds uploaded onto the handset on the PC, as they are deleted during an Emergency Update. |