Questions and answers


You are not sure whether your device is equipped with an integrated answer machine.
Open the answer machine menu: OK Your device is equipped with an integrated answer machine if the submenu Activation is available.
The display is blank.
1.	The handset is not activated. Hold down .
2.	The battery is empty. Charge the battery or replace it ( Inserting the batteries and closing the battery cover).
3.	The key and display lock is activated. Hold down the hash key .
"No Base" flashes on the display.
1.	The handset is outside the range of the base. Move the handset closer to the base.
2.	The base is not activated. Check the base power adapter.
3.	The base's range is reduced because Maximum Range is deactivated. Activate Maximum Range or reduce the distance between the handset and base.
"Please register handset" or "Place handset in base" flashes on the display.
The handset has not yet been registered or was de-registered due to the registration of an additional handset (more than six DECT registrations). Register the handset again ( Registering the handset).
Your settings are not accepted.
Ensure that you have set the Profile Personal before you make changes to the device settings ( Sound profiles).
The handset does not ring.
1.	The ringtone is deactivated. Activate ringtone ( Activating/deactivating the ringtone).
2.	Call forwarding is set. Deactivate call forwarding.
3.	The phone does not ring if the caller has withheld his number. Activate the ringtone for unknown calls ( Protection from anonymous callers).
4.	The phone does not ring during a specific period or for certain numbers. Check time control for external calls ( Protection against unwanted calls) .
The other party cannot hear you.
The handset is "muted". Activate the microphone again ( Switching the microphone on/off (muting)).
The caller's number is not displayed.
1.	Calling Line Identification (CLI) is not approved for the caller. The caller should ask the network provider to enable Calling Line Identification (CLI).
2.	Caller display (CLIP) is not supported by the network provider or is not enabled for you. Caller display (CLIP) is enabled by the network provider.
3.	Your telephone is connected via a PABX or a router with an integrated PABX (gateway) that does not transmit all information. Reset the system: Briefly pull out the power plug. Reinsert the plug and wait until the device restarts. Check the settings on the PABX and activate phone number display, if necessary. To do this, search for terms such as CLIP, calling line identification, phone number identification, caller ID, etc. in the system's user guide or ask the system manufacturer.
You hear an error tone when keying an input.
Action has failed/invalid input. Repeat the process. Read the display and refer to the user guide if necessary.
You cannot listen to messages on the network mailbox.
Your PABX is set to pulse dialling. Set your PABX to tone dialling.