Telephony
Changing the standard send connection
If the telephone has more than one VoIP connection, outgoing calls are initiated via the standard send connection (
Making a call).
Changing the standard send connection:
Settings Telephony Connections All the configured connections are shown. The check box
under
Default send connection shows which connection is currently selected.
Check the connection required
SetOnly active connections can be selected.
Settings for Call Waiting
Specify the telephone's response when another call comes in during a call.
Settings Telephony Call Settings For each connection:
Prevent/permit Call Waiting:
Select the option under
Display waiting call (
= Call Waiting permitted) /
deselect (
= Call Waiting not permitted)
Permit Call Waiting:
Select
Acoustic signal from the list
Off: the incoming call is shown in the display only
or signalling with a Call Waiting tone (beep): once or every 4, 10, or 20 seconds
Save the settings:
SetSetting up Call Divert
| The provider/the PABX supports this function. |
Forwarding incoming calls to another number or a network mailbox.
Settings Telephony Call Divert For each connection (Incoming line):
All Calls | Forward all incoming calls. |
When Busy | Forward incoming calls when the line is busy. |
No Answer | Forward incoming calls after a defined period if they are not accepted. |
Specifying the destination of diverted calls:
Check the box
under
Voicemailor
check the box
under
Target number enter the number, to which calls are to be diverted
For diverting calls when No Answer:
From the
Delay list, select the period after which Call Divert should be activated.
Activating/deactivating Call Divert:
Select the option under
Active (
= activated
) / deselect (
= not activated
) Set | Setting up Call Divert via the display menu: Call divert |
Do not Disturb
| The provider/the PABX supports this function. |
Block phone numbers and/or all anonymous calls. Calls from blocked numbers are not signalled.
Settings Telephony Do not Disturb The black list contains all the blocked numbers.
Activate the black list: | Set the switch next to DND list to Yes |
Block a number: | Enter Name and Phone number of the call click on Add |
Delete an entry: | Click next to the entry |
Delete all entries: | Click Delete all |
Block all anonymous calls: | Activate the option Block anonymous callers ( = activated ) |
Save the settings: | Set |